Zortrax
Inkspire 2
Build: 192×120×280 mmVolume: 6.45 LXY res: 50 µmLight: In-House Developed UV LED Light Engine
MSRP
$4.4k
Where to buy
No active listings right now.
Best use cases
Engineering end-use parts, automotive brackets, pre-series production runs
Full specifications
Build
- Build envelope
- 192×120×280 mm
- Build volume
- 6.45 L
- Process
- mSLA / LCD
Light & optics
- Light/laser source
- In-House Developed UV LED Light Engine
- Optical engine
- 9.3-inch 4K Monochrome LCD
- Light/laser power
- 550 mW
- Optical wavelength
- 405 nm
- XY resolution
- 50 µm
- Min layer thickness
- 25 µm
- Heated vat temp
- 35 °C
- Peeling mechanism
- FEP Film Low-Adhesion Peeling
Resin handling
- Vat capacity
- 1.5 L
- Open material architecture
- Yes
- Automated resin handling
- Y
- Compatible resin families
- Zortrax Resins, BASF Ultracur3D, Henkel Loctite
Physical
- Max print speed
- 50 mm/h
- Power consumption
- 200 W
- Machine weight
- 22 kg
- Best use cases
- Engineering end-use parts, automotive brackets, pre-series production runs
Data quality
- Data confidence
- Not yet verified
Accessories for this printer
Browse all →Wash & cure stations
Figure 4 UV Cure Unit 350
OfficialThe Figure 4 UV Cure Unit 350 is a dedicated post-processing station designed to finalize parts printed on the Figure 4 Modular system. It uses light-based curing to achieve the necessary material properties in minutes rather than hours.
—
Sample Wash & Cure Station
All-in-one washing and UV curing for resin prints.
$70
Safety & ventilation
Similar printers
MSRP
$4.4k
No listing