UnionTech
Martrix 520
Build: 298×164×300 mmVolume: 14.66 LXY res: 46 µmLight: High-Power Collimated UV Matrix (405nm)
MSRP
$14.5k
Where to buy
No active listings right now.
Best use cases
Production tooling, jigs & fixtures, end-use electrical housings
Full specifications
Build
- Build envelope
- 298×164×300 mm
- Build volume
- 14.66 L
- Process
- mSLA / LCD
Light & optics
- Light/laser source
- High-Power Collimated UV Matrix (405nm)
- Optical engine
- 13.6-inch 7K Industrial Mono LCD
- Light/laser power
- 1200 mW
- Optical wavelength
- 405 nm
- XY resolution
- 46 µm
- Min layer thickness
- 25 µm
- Heated vat temp
- 35 °C
- Peeling mechanism
- Low-Force Tensioned Release Film
Resin handling
- Vat capacity
- 3 L
- Open material architecture
- Yes
- Automated resin handling
- Y
- Compatible resin families
- High-Impact, Flame Retardant, Rigid Polyurethane Resins
Physical
- Max print speed
- 80 mm/h
- Power consumption
- 450 W
- Machine weight
- 58 kg
- Best use cases
- Production tooling, jigs & fixtures, end-use electrical housings
Data quality
- Data confidence
- Not yet verified
Accessories for this printer
Browse all →Wash & cure stations
Figure 4 UV Cure Unit 350
OfficialThe Figure 4 UV Cure Unit 350 is a dedicated post-processing station designed to finalize parts printed on the Figure 4 Modular system. It uses light-based curing to achieve the necessary material properties in minutes rather than hours.
—
Sample Wash & Cure Station
All-in-one washing and UV curing for resin prints.
$70
Safety & ventilation
Similar printers
MSRP
$14.5k
No listing