Shining 3D
AccuFab-CEL
Build: 140×78×160 mmVolume: 1.75 LXY res: 24 µmLight: Collimated High-Power UV Engine
MSRP
$6.0k
Where to buy
No active listings right now.
Best use cases
Chairside dental crowns, temporary bridges, splints, orthodontic aligners
Full specifications
Build
- Build envelope
- 140×78×160 mm
- Build volume
- 1.75 L
- Process
- mSLA / LCD
Light & optics
- Light/laser source
- Collimated High-Power UV Engine
- Optical engine
- 6-inch 6K Mono LCD
- Light/laser power
- 700 mW
- Optical wavelength
- 405 nm
- XY resolution
- 24 µm
- Min layer thickness
- 25 µm
- Heated vat temp
- 35 °C
- Peeling mechanism
- High-Speed Ceramic Release Membrane
Resin handling
- Vat capacity
- 0.8 L
- Open material architecture
- Yes
- Automated resin handling
- Y
- Compatible resin families
- Dental Restoration, Crown, Bridge, Splint Resins
Physical
- Max print speed
- 100 mm/h
- Power consumption
- 200 W
- Machine weight
- 22 kg
- Best use cases
- Chairside dental crowns, temporary bridges, splints, orthodontic aligners
Data quality
- Data confidence
- Not yet verified
Accessories for this printer
Browse all →Wash & cure stations
Figure 4 UV Cure Unit 350
OfficialThe Figure 4 UV Cure Unit 350 is a dedicated post-processing station designed to finalize parts printed on the Figure 4 Modular system. It uses light-based curing to achieve the necessary material properties in minutes rather than hours.
—
Sample Wash & Cure Station
All-in-one washing and UV curing for resin prints.
$70
Safety & ventilation
Similar printers
MSRP
$6.0k
No listing