Prusa Research
SL1S SPEED
Build: 127×80×150 mmVolume: 1.52 LXY res: 49 µmLight: Monolithic UV LED Array + Collimator
MSRP
$2.0k
Where to buy
No active listings right now.
Best use cases
Medical research labs, dental crowns, rapid tooling engineering pieces
Full specifications
Build
- Build envelope
- 127×80×150 mm
- Build volume
- 1.52 L
- Process
- mSLA / LCD
Light & optics
- Light/laser source
- Monolithic UV LED Array + Collimator
- Optical engine
- 5.96-inch 2K Mono LCD
- Light/laser power
- 600 mW
- Optical wavelength
- 405 nm
- XY resolution
- 49 µm
- Min layer thickness
- 25 µm
- Heated vat temp
- 35 °C
- Peeling mechanism
- Tilting Bed Peeling Mechanism
Resin handling
- Vat capacity
- 0.6 L
- Open material architecture
- Yes
- Automated resin handling
- N
- Compatible resin families
- Tough, Dental, Flex, Castable, Standard
Physical
- Max print speed
- 100 mm/h
- Power consumption
- 100 W
- Machine weight
- 11 kg
- Best use cases
- Medical research labs, dental crowns, rapid tooling engineering pieces
Data quality
- Data confidence
- High
- Data sources
- https://www.prusa3d.com/product/original-prusa-sl1s-speed-3d-printer/; https://www.prusa3d.com/category/3d-printers/
Accessories for this printer
Browse all →Wash & cure stations
Figure 4 UV Cure Unit 350
OfficialThe Figure 4 UV Cure Unit 350 is a dedicated post-processing station designed to finalize parts printed on the Figure 4 Modular system. It uses light-based curing to achieve the necessary material properties in minutes rather than hours.
—
Sample Wash & Cure Station
All-in-one washing and UV curing for resin prints.
$70
Safety & ventilation
Similar printers
MSRP
$2.0k
No listing