Phrozen
Transform 4K
Build: 292×165×400 mmVolume: 19.27 LXY res: 76 µmLight: ParaLED Optical Engine
MSRP
$1.5k
Where to buy
No active listings right now.
Best use cases
Large architectural models, theatrical masks, engineering mockups
Full specifications
Build
- Build envelope
- 292×165×400 mm
- Build volume
- 19.27 L
- Process
- mSLA / LCD
Light & optics
- Light/laser source
- ParaLED Optical Engine
- Optical engine
- 13.3-inch 4K Mono LCD
- Light/laser power
- 600 mW
- Optical wavelength
- 405 nm
- XY resolution
- 76 µm
- Min layer thickness
- 10 µm
- Heated vat temp
- 25 °C
- Peeling mechanism
- Dual-Film Peeling Mechanism
Resin handling
- Vat capacity
- 2 L
- Open material architecture
- Yes
- Automated resin handling
- N
- Compatible resin families
- Standard, ABS-Like, Engineering
Physical
- Max print speed
- 40 mm/h
- Power consumption
- 220 W
- Machine weight
- 33 kg
- Best use cases
- Large architectural models, theatrical masks, engineering mockups
Data quality
- Data confidence
- Not yet verified
Accessories for this printer
Browse all →Wash & cure stations
Figure 4 UV Cure Unit 350
OfficialThe Figure 4 UV Cure Unit 350 is a dedicated post-processing station designed to finalize parts printed on the Figure 4 Modular system. It uses light-based curing to achieve the necessary material properties in minutes rather than hours.
—
Sample Wash & Cure Station
All-in-one washing and UV curing for resin prints.
$70
Safety & ventilation
Similar printers
MSRP
$1.5k
No listing