Phrozen
Sonic Saber
Build: 100×100×100 mmVolume: 1 LXY res: 20 µmLight: Ultrasonic Laser Diode Module
MSRP
$199
Where to buy
No active listings right now.
Best use cases
Resin support removal, miniature finishing, gate trimming
Full specifications
Build
- Build envelope
- 100×100×100 mm
- Build volume
- 1 L
- Process
- SLA / Laser
Light & optics
- Light/laser source
- Ultrasonic Laser Diode Module
- Optical engine
- Ultrasonic Cutter Toolhead
- Light/laser power
- 100 mW
- Optical wavelength
- 405 nm
- XY resolution
- 20 µm
- Min layer thickness
- 10 µm
- Heated vat temp
- 25 °C
- Peeling mechanism
- Manual Ultrasonic Blade
Resin handling
- Vat capacity
- 0.2 L
- Open material architecture
- Yes
- Automated resin handling
- N
- Compatible resin families
- Post-Processing Resins
Physical
- Max print speed
- 50 mm/h
- Power consumption
- 40 W
- Machine weight
- 2.5 kg
- Best use cases
- Resin support removal, miniature finishing, gate trimming
Data quality
- Data confidence
- Not yet verified
Accessories for this printer
Browse all →Wash & cure stations
Figure 4 UV Cure Unit 350
OfficialThe Figure 4 UV Cure Unit 350 is a dedicated post-processing station designed to finalize parts printed on the Figure 4 Modular system. It uses light-based curing to achieve the necessary material properties in minutes rather than hours.
—
Sample Wash & Cure Station
All-in-one washing and UV curing for resin prints.
$70
Safety & ventilation
Similar printers
MSRP
$199
No listing