Genera
G2 Production
Build: 384×216×320 mmVolume: 26.54 LXY res: 50 µmLight: High-Power 385nm UV LED Optical Unit
MSRP
$65k
Where to buy
No active listings right now.
Best use cases
Low-to-medium volume digital factory production, connector plugs, housings
Full specifications
Build
- Build envelope
- 384×216×320 mm
- Build volume
- 26.54 L
- Process
- Industrial DLP
Light & optics
- Light/laser source
- High-Power 385nm UV LED Optical Unit
- Optical engine
- 4K UHD Native DLP Light Engine
- Light/laser power
- 1600 mW
- Optical wavelength
- 385 nm
- XY resolution
- 50 µm
- Min layer thickness
- 20 µm
- Heated vat temp
- 40 °C
- Peeling mechanism
- Dynamic Membrane Tensioning System
Resin handling
- Vat capacity
- 4.5 L
- Open material architecture
- Yes
- Automated resin handling
- Y
- Compatible resin families
- Loctite 3D, BASF Forward AM, Genera Clear, Tough
Physical
- Max print speed
- 80 mm/h
- Power consumption
- 1800 W
- Machine weight
- 380 kg
- Best use cases
- Low-to-medium volume digital factory production, connector plugs, housings
Data quality
- Data confidence
- Not yet verified
Accessories for this printer
Browse all →Wash & cure stations
Figure 4 UV Cure Unit 350
OfficialThe Figure 4 UV Cure Unit 350 is a dedicated post-processing station designed to finalize parts printed on the Figure 4 Modular system. It uses light-based curing to achieve the necessary material properties in minutes rather than hours.
—
Sample Wash & Cure Station
All-in-one washing and UV curing for resin prints.
$70
Safety & ventilation
Similar printers
MSRP
$65k
No listing