Elegoo
Jupiter SE
Build: 278×156×300 mmVolume: 13.01 LXY res: 51 µmLight: COB Refraction Light Source
MSRP
$699
Where to buy
No active listings right now.
Best use cases
Full-scale helmets, massive monster sculptures, industrial prototype housings
Full specifications
Build
- Build envelope
- 278×156×300 mm
- Build volume
- 13.01 L
- Process
- mSLA / LCD
Light & optics
- Light/laser source
- COB Refraction Light Source
- Optical engine
- 12.8-inch 6K Mono LCD
- Light/laser power
- 650 mW
- Optical wavelength
- 405 nm
- XY resolution
- 51 µm
- Min layer thickness
- 10 µm
- Heated vat temp
- 25 °C
- Peeling mechanism
- PFA (nFEP) Film Peeling
Resin handling
- Vat capacity
- 2 L
- Open material architecture
- Yes
- Automated resin handling
- Y
- Compatible resin families
- Standard, ABS-Like, Tough, Water-Washable
Physical
- Max print speed
- 70 mm/h
- Power consumption
- 180 W
- Machine weight
- 19.5 kg
- Best use cases
- Full-scale helmets, massive monster sculptures, industrial prototype housings
Data quality
- Data confidence
- Not yet verified
Accessories for this printer
Browse all →Wash & cure stations
Figure 4 UV Cure Unit 350
OfficialThe Figure 4 UV Cure Unit 350 is a dedicated post-processing station designed to finalize parts printed on the Figure 4 Modular system. It uses light-based curing to achieve the necessary material properties in minutes rather than hours.
—
Sample Wash & Cure Station
All-in-one washing and UV curing for resin prints.
$70
Safety & ventilation
Similar printers
MSRP
$699
No listing