DWS Systems
028J Plus
Build: 90×90×90 mmVolume: 0.73 LXY res: 20 µmLight: Solid-State BlueEdge Laser (405nm)
MSRP
$42k
Where to buy
No active listings right now.
Best use cases
Fine filigree jewelry, micro-pave stone setting masters, miniature horology
Full specifications
Build
- Build envelope
- 90×90×90 mm
- Build volume
- 0.73 L
- Process
- Industrial SLA
Light & optics
- Light/laser source
- Solid-State BlueEdge Laser (405nm)
- Optical engine
- High-Precision Laser Galvo Scanner
- Light/laser power
- 300 mW
- Optical wavelength
- 405 nm
- XY resolution
- 20 µm
- Min layer thickness
- 10 µm
- Heated vat temp
- 25 °C
- Peeling mechanism
- TTT Rotating Resin Vat
Resin handling
- Vat capacity
- 1.5 L
- Open material architecture
- No
- Automated resin handling
- Y
- Compatible resin families
- Fila, Invicta, Therma, Castable Resins
Physical
- Max print speed
- 25 mm/h
- Power consumption
- 300 W
- Machine weight
- 70 kg
- Best use cases
- Fine filigree jewelry, micro-pave stone setting masters, miniature horology
Data quality
- Data confidence
- Not yet verified
Accessories for this printer
Browse all →Wash & cure stations
Figure 4 UV Cure Unit 350
OfficialThe Figure 4 UV Cure Unit 350 is a dedicated post-processing station designed to finalize parts printed on the Figure 4 Modular system. It uses light-based curing to achieve the necessary material properties in minutes rather than hours.
—
Sample Wash & Cure Station
All-in-one washing and UV curing for resin prints.
$70
Safety & ventilation
Similar printers
MSRP
$42k
No listing