Creality
Halot-Mage Pro
Build: 228×128×230 mmVolume: 6.71 LXY res: 29.7 µmLight: Integral Light Source 3.0 (COB)
MSRP
$499
Where to buy
No active listings right now.
Best use cases
Rapid iterative product prototypes, high-speed gaming models, detailed figurines
Full specifications
Build
- Build envelope
- 228×128×230 mm
- Build volume
- 6.71 L
- Process
- mSLA / LCD
Light & optics
- Light/laser source
- Integral Light Source 3.0 (COB)
- Optical engine
- 10.3-inch 8K Mono LCD
- Light/laser power
- 600 mW
- Optical wavelength
- 405 nm
- XY resolution
- 29.7 µm
- Min layer thickness
- 10 µm
- Heated vat temp
- 25 °C
- Peeling mechanism
- High-Speed ACF Release Film
Resin handling
- Vat capacity
- 1 L
- Open material architecture
- Yes
- Automated resin handling
- Y
- Compatible resin families
- High-Speed, Standard, Rigid, Tough, Water-Washable
Physical
- Max print speed
- 170 mm/h
- Power consumption
- 150 W
- Machine weight
- 13 kg
- Best use cases
- Rapid iterative product prototypes, high-speed gaming models, detailed figurines
Data quality
- Data confidence
- Not yet verified
Accessories for this printer
Browse all →Wash & cure stations
Figure 4 UV Cure Unit 350
OfficialThe Figure 4 UV Cure Unit 350 is a dedicated post-processing station designed to finalize parts printed on the Figure 4 Modular system. It uses light-based curing to achieve the necessary material properties in minutes rather than hours.
—
Sample Wash & Cure Station
All-in-one washing and UV curing for resin prints.
$70
Safety & ventilation
Similar printers
MSRP
$499
No listing