Ackuretta
SOL Plus
Build: 192×120×170 mmVolume: 3.92 LXY res: 49 µmLight: Uniform Matrix UV LED (405nm)
MSRP
$5.0k
Where to buy
No active listings right now.
Best use cases
Dental working models, surgical splints, clear aligner arches, nightguards
Full specifications
Build
- Build envelope
- 192×120×170 mm
- Build volume
- 3.92 L
- Process
- mSLA / LCD
Light & optics
- Light/laser source
- Uniform Matrix UV LED (405nm)
- Optical engine
- 9.3-inch 4K Monochrome LCD
- Light/laser power
- 750 mW
- Optical wavelength
- 405 nm
- XY resolution
- 49 µm
- Min layer thickness
- 25 µm
- Heated vat temp
- 35 °C
- Peeling mechanism
- SolFEP Tension Film
Resin handling
- Vat capacity
- 1 L
- Open material architecture
- Yes
- Automated resin handling
- N
- Compatible resin families
- Over 150 Validated Dental Resins (Pac-Dent, Keystone, BEGO)
Physical
- Max print speed
- 75 mm/h
- Power consumption
- 180 W
- Machine weight
- 16 kg
- Best use cases
- Dental working models, surgical splints, clear aligner arches, nightguards
Data quality
- Data confidence
- Not yet verified
Accessories for this printer
Browse all →Wash & cure stations
Figure 4 UV Cure Unit 350
OfficialThe Figure 4 UV Cure Unit 350 is a dedicated post-processing station designed to finalize parts printed on the Figure 4 Modular system. It uses light-based curing to achieve the necessary material properties in minutes rather than hours.
—
Sample Wash & Cure Station
All-in-one washing and UV curing for resin prints.
$70
Safety & ventilation
Similar printers
MSRP
$5.0k
No listing