Sunlu
Sunlu PLA+
PLA
Rapid prototyping, snap-together parts, student models; Heated bed
Full specifications
Mechanical
- Tensile strength
- 46 MPa
- Elongation at break
- 10 %
- Flexural strength
- 83 MPa
- Flexural modulus
- 2750 MPa
- Izod impact (notched)
- 10 kJ/m²
- Shore hardness
- 80D
Thermal
- HDT @ 0.45 MPa
- 56 °C
- HDT @ 1.82 MPa
- 53 °C
- Glass transition
- 61 °C
- Max service temp
- 52 °C
Print settings
- Nozzle temp
- 205-245 °C
- Bed temp
- 50-60 °C
- Print speed
- 90 mm/s
- Enclosure required
- No
- Shrinkage / warping
- 0.26%
- Moisture sensitive
- No
Physical
- Density
- 1.21 g/cm³
- Available colors
- 22 Colors
- Chemical / UV resistance
- High toughness, improved layer cohesion over standard PLA
Data sources
https://www.sunlu.com/products/pla-plus-filament; https://media.sunlu.com/prod/20260618/65301701781747847057.pdf?filename=TDS; https://store.sunlu.com/collections/filament