ETEC (EnvisionTEC)
HTM 140 v2
High-Temp
Vulcanized rubber mold masters, thermoforming tooling, hot gas jigs; ETEC Envision One & Perfactory
Full specifications
Mechanical
- Tensile strength
- 65 MPa
- Elongation at break
- 3.8 %
- Flexural strength
- 110 MPa
- Flexural modulus
- 3200 MPa
- Izod impact (notched)
- 22 J/m
- Shore hardness
- 88D
- Compressive strength
- 115 MPa
Thermal
- HDT @ 0.45 MPa
- 140 °C
- HDT @ 1.82 MPa
- 110 °C
- Glass transition
- 135 °C
- Max service temp
- 115 °C
Curing & print
- Viscosity @ 25°C
- 520 cP
- Cure wavelength
- 385nm nm
- Post-cure
- 120 min @ 90°C thermal bake
- Shrinkage / accuracy
- 0.90%
- Water-washable
- No
Physical
- Density
- 1.19 g/cm³
- Available colors
- Green
- Biocompatibility
- High temperature vulcanization molding